Skip to content
Win your whole order free, up to $5,000 · Enter now
0 items in cart

Cart

Your cart is empty.

How to measure

Measure every window, even ones that look the same. Measure to the nearest 1/8 inch and write down exactly what you measure.

Before you start

You'll need a steel tape measure, a pencil and the worksheet below. For each window, choose an inside mount (the shade fits inside the window frame) or an outside mount (the shade mounts on the wall or trim around it). Label each window by room and position so every measurement matches the right shade.

Choose a mount
W1 to W3: widths inside the frame. H1 to H3: heights inside the frame. D: frame depth.

Measuring for an inside mount

  1. Width at three points

    Measure inside the frame at the top, middle and bottom. Record all three.

  2. Height at three points

    Measure inside the frame at the left, center and right. Record all three.

  3. Frame depth

    Measure from the front edge of the frame to the glass or the nearest obstruction. The depth you need depends on the shade's hardware, so contact us before you order if you're not sure yours is deep enough.

  4. Obstructions

    Note anything in the way, such as handles, locks, sensors, tile or trim.

Two sizes worth knowing

Opening size and ordered size

The opening size is the space you measure. The ordered size is the width and height you enter for your shade. Enter exactly what you measure. Don't add or subtract anything unless your product's instructions say to.

Hardware width and fabric width

A roller shade's overall width includes its brackets and end caps, so the fabric is a little narrower than the hardware. On an inside mount, this can leave a slim light gap at each side. Contact us if you need the exact difference for your shade.

Room worksheet

Fill this in as you measure. It saves on this device so you can come back to it, and it prints neatly to take from room to room.

Saved on this device only.

Before you finalize

  • Read the tape again, and check you haven't swapped width and height.
  • Keep each fraction with its whole-inch measurement.
  • Check every window label against your room plan.
  • Not sure about the size or depth for your shade? Contact us before you order.
Contact us

Free fabric samples

See it at your window first

Fabric samples are free and ship free. Tell us where to reach you, then pick your colors.